|
1999 Electric motor cycle
This project was an exercise
I had a 24" bicycle, one car battery and one starter
It required to bring all together and to see the result
The starter needed one big modification
In fact this kind of motor has no bearing on the output shaft
It required to build an aluminum flabby to hold the bearing
The second problem was to maintain the pinion on the output shaft
The third problem was to maintain the 52 teeth pinion on the
rear wheel
I have solved the problem with one piece made of Epoxy with 1,6
mm thickness
The forth problem was to maintain the starter to the frame of
the bicycle
I have used one piece of U shape steel
It was drilled and maintained to the frame with one piece of
aluminum
The frame of the bicycle was sandwiched between these pieces
The starter was maintain to the U shape piece with one metallic
bridle
|
